Browse Title Index


 
Issue Title
 
Vol 2, No 1 (2010) A Combined Subdivision and Advancing Loop-Front Surface Mesher (Triangular) for Automotive Structures Abstract
Nilanjan Mukherjee
 
Vol 3, No 4 (2011) A Computerized Tyre Pressure Control System for Off-road Vehicles Abstract
M.A.A. Emam, S.M. Shaaban, S.M. El-Demerdash, H.M. El-Zomor
 
Vol 9, No 2 (2017) A Novel Air Index for Range Queries in Road Networks Abstract
M. Veeresha, M. Sugumaran
 
Vol 7, No 3 (2015) A Theoretical Method for Structural Design and Analysis of Crankshafts Abstract
Sergio Baragetti
 
Vol 9, No 1 (2017) Accelerating the Product Development of a Commercial Vehicle Radiator using Finite Element Analysis Abstract
P.R. Roy, V. Hariram, M. Subramanian
 
Vol 6, No 1-2 (2014) Acoustic Emission based Monitoring of Cut-out Geometry Effects in Carbon-Epoxy Laminates under Uni-axial Compression Abstract   PDF
Jefferson Andrew, Vellayaraj Arumugam, Adhithya Plato Sidharth, Benny Thomas
 
Vol 2, No 3-4 (2010) Active Control of Crack Propagation in Laminated Composite Plate Embedded with Piezoelectric Material Abstract
M. Sundaravadivel, R. Dhanaraj
 
Vol 9, No 2 (2017) Active Vibration Control of Automotive Suspension System using Fuzzy Logic Algorithm Abstract
A.S Emam
 
Vol 9, No 1 (2017) Adaptive Cruise Control Implementation using Controller Area Network Protocol Abstract
K. Rooban, V. Gobu
 
Vol 4, No 3 (2012) Advanced Reinforced Thermoplastic Composites for Mass Transit and Heavy Truck Applications Abstract
U.K. Vaidya, Selvum Brian Pillay, K. Balaji Thattai, Haibin Ning
 
Vol 7, No 1 (2015) Aerodynamic Simulation, Thermal and Fuel Consumption Analysis of Hydrogen Powered Fuel Cell Vehicle Abstract
Ajay Kumar, Sachin Mishra, Brajesh Tripathi, Pradeep Kumar, Ish Hunar Sharma
 
Vol 9, No 2 (2017) Aided System for Visually Impaired People in Bus Transport using Intel Galileo Gen-2: Technical Note Abstract
K. Bommaraju, A. Manikandan, S. Ramalingam
 
Vol 4, No 3 (2012) Aircraft Composite Skin Stacking Sequence Generation using Genetic Algorithms Abstract
K. Sathyanarayana, V. Sandeep, K.R. Pradeep, D. Sujib, K. Ravindra, G.V.V. Ravi Kumar
 
Vol 3, No 3 (2011) An Investigation into the Use of an Embedded Process Zone Model for Predicting the Structural Behaviour of Adhesive Bonded Joints Abstract
M. Clarke, J.G. Broughton, A.R. Hutchinson, M. Buckley
 
Vol 6, No 1-2 (2014) Analysis and Testing for Slip Characteristics of Artificial Hydraulic Circuit based Push-Belt Continuously Variable Transmission Abstract   PDF
Eid S. Mohamed, Saeed A. Albatlan
 
Vol 6, No 4 (2014) Analysis of Axial Crack in Aircraft Fuselage Circumferential Joint using Finite Element Simulation Abstract   PDF
H. Ramesha, N.C. Mahendra Babu, H.V. Lakshminarayana
 
Vol 4, No 4 (2012) Analysis of Low Energy Impact on Filament-wound Composite Cylinders Abstract
Marcelo L. Ribeiro, Tulio Martins, Murilo Sartorato, Gregorio F.O. Ferreira, Volnei Tita, Dirk Vandepitte
 
Vol 9, No 1 (2017) Analysis of MR Damper for Quarter and Half Car Suspension Systems of a Roadway Vehicle Abstract
D.V.A.R. Sastry, K.V. Ramana, N.M. Rao, P. Pruthvi, D.U.V. Santhosh
 
Vol 6, No 3 (2014) Analysis of Plastic Oil-Gas Separator for Diesel Engine Valve Chamber Cover Abstract   PDF
Zhang Xinjie
 
Vol 3, No 3 (2011) Analysis of Structural Impact and Crashworthiness using Experimental, Analytical and Computational Techniques: An Overview and Recent Developments Abstract
Yucheng Liu, Stefan Chu, Raul Viera
 
Vol 7, No 2 (2015) Analysis of Tubular Visco-Elastic Suspension based Vibration Isolation in Wheeled Construction Vehicles Abstract
Bijuan Yan, Dagang Sun, Wenjun Zhang, Zhanlong Li
 
Vol 3, No 2 (2011) Application of Shell Elements to Create Advanced Finite Element Model for Offset Deformable Barrier Abstract
Mehrdad Asadi, Brian Walker
 
Vol 7, No 3 (2015) Assessment of Manual, Automatic and Continuously Variable Transmission Powertrains for Gasoline Engine Powered Midsize Saloon Vehicle Abstract
Eid S. Mohamed, Mohamed I. Khalil, Shawki A. Abouel-Seoud
 
Vol 6, No 1-2 (2014) Assessment of Passenger Ride Comfort during Vertical Vibration of Mid-size Saloon and Off-road Vehicles on Asphalt Roads Abstract   PDF
Shawki A. Abouel-Seoud
 
Vol 8, No 2 (2016) Automatic Adaptation of Tire Pressure According to Operating Conditions Abstract
A. Hendy, Shawky Hegazy, M.A.A. Emam, H. Hossamel-din
 
Vol 3, No 3 (2011) Ballistic Impact Perforation into GLARE Targets: Experiment, Numerical Modelling and Investigation of Aluminium Stacking Sequence Abstract
Hadi Sabouri, Hamed Ahmadi, Gholam Liaghat
 
Vol 8, No 4 (2016) Bearing Fault Diagnosis Based on Statistical Feature Extraction in Time and Frequency Domain and Neural Network Abstract
L.S. Dhamande , M.B. Chaudhari
 
Vol 2, No 2 (2010) Behaviour of an Impact Attenuator for Formula SAE Car under Dynamic Loading Abstract
Simonetta Boria
 
Vol 3, No 1 (2011) Brake Judder - An Investigation of the Thermo-elastic and Thermo-plastic Effects during Braking Abstract
David Bryant, John D. Fieldhouse, Chris J. Talbot
 
Vol 3, No 1 (2011) Brake Squeal - Modeling and Experimental Investigation Using a Work Criterion Abstract
Utz von Wagner, Holger Godecker, Stefan Schlagner
 
Vol 2, No 1 (2010) Bus Structure Behaviour under Driving Manoeuvring and Evaluation of the Effect of an Active Roll System Abstract
A. Gauchia, V. Diaz, M.J.L Boada, O. A. Olatunbosun, B.L Boada
 
Vol 5, No 3-4 (2013) CAE Simulation Based Methodology for Airbag Compliant Vehicle Front Protection System Development Abstract   PDF
Narasimha Thota, Jayantha Epaarachchi, Kin Tak Lau
 
Vol 7, No 1 (2015) Challenges in Rail Vehicle-Track Modeling and Simulation Abstract
Sunil Kumar Sharma, Rakesh Chandmal Sharma, Anil Kumar, Srihari Palli
 
Vol 8, No 2 (2016) Characterisation of Silicon Carbide and Fly Ash in LM13 Aluminium Alloy Matrix Composites Abstract
C. Krishnaraj, P. Divinesh, O.M. Mohaideen
 
Vol 8, No 3 (2016) Characteristics and Mechanical Properties of Rolling-Element Bearings Abstract
Lv Haiting
 
Vol 8, No 3 (2016) Children Pillion Rider Safety Awareness among Motorcycle Users in Malaysia Abstract
S. Sivasankar, K. Karmegam, M.T.S. Bahri, S. Kulanthayan, Z.A. Emilia, H.N. Sadeghi, A.K. Haszeme, S.M Ya
 
Vol 1, No 1-3 (2009) Combined Applications of Test and CAE for Assessing Performance of Aircraft Windshield-Like Structures under Bird Impacts Abstract
Anindya Deb, K. Vijayaraju, T.C. Subba Reddy
 
Vol 9, No 1 (2017) Comparative Analysis of Various CFBC Cyclone Separator REPDS Profiles Abstract
N. Prasanna, R.S. Prakash, M. Vijayakumar
 
Vol 9, No 1 (2017) Comparative Study of Joining Processes of High Conductivity Electrolytic Tough Pitch Copper used in Automotive Industries Abstract
V. Amarnath, P. Karuppuswamy, V. Balasubramanian
 
Vol 4, No 2 (2012) Comparative Study of Steering Mechanisms for Large Wheelbase Vehicles Abstract
S. Pramanik, R.B. Ingle, A.A. Latey
 
Vol 7, No 1 (2015) Comparison of Air Spring Actuator and Electro-Hydraulic Actuator in Automotive Suspension System Abstract
J. Jancirani, P. Sathishkumar, Manar Eltantawie, Dennie John
 
Vol 1, No 1-3 (2009) Complex Eigenvalue Analysis of Windscreen Wiper Chatter Noise and its Suppression by Structural Modifications Abstract
Ibrahim Marzukie Awang, Abd Rahim AbuBakar, Badri Abd Ghani, Roslan Abd Rahman, Mohd Zarhamdy Md Zain
 
Vol 3, No 3 (2011) Computational and Experimental Testing of the Steel Reinforced Wooden Road Safety Barrier Abstract
Matej Borovinsek, Matej Vesenjak, Zoran Ren
 
Vol 1, No 1-3 (2009) Computational Assessment of Occupant Injury Caused by Mine Blasts underneath Infantry Vehicles Abstract
Gaurav Nilakantan, Ala Tabiei
 
Vol 7, No 2 (2015) Computational Fluid Dynamics Analysis and Runner Test of Automobile Engine Intake Manifold Structure Abstract
Zhang Xinjie
 
Vol 7, No 1 (2015) Computational Fluid Dynamics Analysis of Empty Railway Freight Wagons Abstract
Shashank B. Kedare, S.C. Sharma, S.P. Harsha
 
Vol 8, No 4 (2016) Computational Investigation of Icing Conditions on The Velocity Profiles of a Commercial Aircraft Abstract
T. Satheesh, J.B.R. Rose
 
Vol 4, No 3 (2012) Computed Tomography based Process Control of Composite Structures for In-service Defects Abstract
G. Ramesh Babu, B.N. Srinivasa Reddy, Krishna Murari
 
Vol 6, No 4 (2014) Conceptual Design of Shock Absorbing Bicycle Wheel Abstract   PDF
M. Rajkumar, R. Gandhinathan
 
Vol 5, No 3-4 (2013) Crashworthiness Improvement of Pardis Train Set using Thin Walled Tubes - Simulation Abstract   PDF
Ehsan Salimi, Mohammad Ali Rezvani, Erfan Shahsavari
 
Vol 8, No 4 (2016) Crashworthiness of a Truck Cabin using Finite Element Simulation Abstract
N.K. Mishra, S.K. Pradhan.
 
Vol 7, No 3 (2015) Crashworthiness of Glass/Polyester Composite Tubular Structures Abstract
S. Solaimurugan, R. Velmurugan
 
Vol 3, No 3 (2011) Damage Tolerance Behaviour of Carbon Fibre Multi-axial Warp Knit Fabric Composites Abstract
K. Hazra, J.F. Harper
 
Vol 8, No 1 (2016) Design and Optimization of Variable Rectangular Cross Section Chassis for On-Road Heavy Vehicles Abstract
K. Rajasekar, R. Saravanan, N.V. Dhandapani
 
Vol 8, No 4 (2016) Design and Performance Optimization of Off-highway Diesel Engine with Mechanical Fuel Injection Equipment for TIER-IV Emission Norms Abstract
K. Subramanian, A. Kandaswamy, S. Mhahadevan
 
Vol 8, No 4 (2016) Design, Development and Electromagnetic Analysis of a Linear Switched Reluctance Motor for Automatic Door Systems of Railway Carriages Abstract
V.G. Sampath, K. Abhishek, N.C. Lenin
 
Vol 7, No 3 (2015) Design Evaluation of Chassis Mounted Platform for Off-Road Wheeled Heavy Vehicles Abstract
Vikas R. Deulgaonkar, Ashok G. Matani, Shrikant P. Kallurkar
 
Vol 7, No 1 (2015) Design Evolution of Drive Booster Configuration for Terrain Vehicles Abstract
G. Janardhana Raju, K. Srinivasulu Reddy, N Venkatachalapathi
 
Vol 8, No 2 (2016) Design Optimization of Rocker Bogie System and Development of Look-Up Table for Reconfigurable Wheels for a Planetary Rover Abstract
A. Kshirsagar, A. Guha
 
Vol 8, No 4 (2016) Determination of Damping Coefficient of a Bump Foil Squeeze Film Damper Abstract
G. Saravanakumar, L. Ravikumar, R. Yogaraju, C. Shravankumar, V. Arunkumar
 
Vol 6, No 3 (2014) Development and Validation of Chassis Mounted Platform Design for Heavy Vehicles Abstract   PDF
Vikas R. Deulgaonkar, Ashok G. Matani
 
Vol 7, No 4 (2015) Development of Closed Cell Metallic Foams for Automotive Crashworthiness Abstract
D. Noorullah, S.S. Mohamed Nazirudeen, A. Mukesh, V. Karthik
 
Vol 8, No 2 (2016) Development of Continuous and Real Time Structural Health Monitoring of Aircraft Primary Structure Through Embedded Carbon Nano Fiber Sensors Abstract
M.S. Nisha, Dalbir Singh, A. Rajaraman
 
Vol 7, No 3 (2015) Direct Injection Diesel Engine Performance Improvement and Emission Control using Boost Pressure Abstract
R. Senthil, R. Silambarasan, G. Pranesh
 
Vol 3, No 1 (2011) Disc Brake Squeal Suppression Through Chamfered and Slotted Pad Abstract
Saw Chun Lin, Choong Chee Guan, Abd Rahim Abu Bakar, Mohd Rahimi Jamaluddin, Wan Mohd Musyris Wan Harujan, Badri Abd Ghani
 
Vol 6, No 3 (2014) Dry Contact and Coupled Thermomechanical Analyses of Brake Disc-Pad using Finite Element Simulation Abstract   PDF
Ali Belhocine, Nouby Mahdi Ghazali, Oday Ibraheem Abdullah
 
Vol 6, No 3 (2014) Dry Sliding Wear and Friction of Aluminium Alloy Silicon Carbide Particulates Reinforced Composites Abstract   PDF
S. Muthukumar, P. Mathiyalagan, R. Mariappan, S. Jayavelu
 
Vol 6, No 1-2 (2014) Dynamic Analysis and Experimental Evaluation of Variable Valve Lift System for Internal Combustion Engine with Double Overhead Camshaft Abstract   PDF
Saeed A. Albatlan, Eid S. Mohamed
 
Vol 7, No 1 (2015) Dynamic Analysis of Indian Railway Integral Coach Factory Bogie Abstract
Srihari Palli, Ramji Koona, Rakesh Chandmal Sharma, Venkatesh Muddada
 
Vol 9, No 1 (2017) Dynamic Behaviour of a 7 DoF Passenger Car Model Abstract
S. Palli, R.C. Sharma, P.P.D. Rao
 
Vol 1, No 1-3 (2009) Dynamic Crushing Behaviour of Box Section Steel Beams Abstract
Yucheng Liu
 
Vol 4, No 1 (2012) Dynamic Performance of Electro-hydraulic Steering System for Off-road Vehicles Abstract
Mohamed Ali Emam, Mohamed Said Baywme Mohamed Tayee, S.M. El-Demerdash, Mahmoud Galal Rabie
 
Vol 1, No 1-3 (2009) Editorial for the Inaugural Issue of the International Journal of Vehicle Structures and Systems Abstract
Anindya Deb, Vijayakumar Sahadevan
 
Vol 9, No 2 (2017) Effect of Active Roll Stabilizer System Performance on Vehicle Stability Abstract
Essam M. Allam, M.A.A. Emam
 
Vol 9, No 1 (2017) Effect of Adjacent Teeth Load on Bending Strength of High Contact Ratio Asymmetrical Spur Gear Drive Abstract
R. Thirumurugan, C.C.C. Deepak, K. Karthieeban
 
Vol 8, No 4 (2016) Effect of ao/W Ratio on Fracture Toughness Parameter of Extra Deep Drawn Steel Sheets: Experimental and Finite Element Studies Abstract
V. Chowdary, D.M. Kulkarni
 
Vol 7, No 4 (2015) Effect of Catalytic Coatings on the Performance, Emission and Combustion Characteristics of Spark Ignition Engines Abstract
P. Sakthivel, N. Nedunchezhian, P. Ponnusamy
 
Vol 8, No 2 (2016) Effect of Dry Sliding Wear Behaviour of AA6061/ZrB2/SiC Hybrid Composite Abstract
S.R. Ruban, K.L.Dev. Wins, J.D.R. Selvam, A.A. Richard
 
Vol 7, No 4 (2015) Effect of Graphene Filler Content on Mechanical Strength and Hardness for Goat Hair Fibre Reinforced Epoxy Composites Abstract
J. Jayaseelan, P. Palanisamy, K.R. Vijayakumar, A. Dhanam Maria Vinita
 
Vol 3, No 3 (2011) Effect of Impact Orientation on Bird Strike Analysis Abstract
Reza Hedayati, Saeed Ziaei-Rad
 
Vol 9, No 2 (2017) Effect of Metallic Nano-additives on Combustion Performance and Emissions of DI CI Engine Fuelled with Palmkernel Methyl Ester Abstract
V. Hariram, S. Seralathan, M. Rajasekaran, M. Dinesh Kumar, S. Padmanabhan
 
Vol 6, No 1-2 (2014) Effect of Multiple Impacts on GFRP Laminates Exposed to Hydrolytic Ageing using Acoustic Emission Monitoring Abstract   PDF
C. Ramesh, Joseph Stanley, Vellayaraj Arumugam, Jefferson Andrew, S. Arunabharathi
 
Vol 7, No 3 (2015) Effect of Multiple Location Defects on the Dynamics of Draft Gear used in Freight Railway Wagon Abstract
Sachin S. Harak, Satish C. Sharma, Sanjay Shukla, Parinay Gupta, Sanjay Kumar, Suraj P. Harsha
 
Vol 3, No 2 (2011) Effect of Nanoclay in Epoxy-based Fibre-glass Composite Laminates subjected to Low Velocity Impact Abstract
K. Palaniradja, A. Thiagarajan, N. Rajesh Mathivanan
 
Vol 5, No 1 (2013) Effect of Natural Frequency in a Low Mass Flexible Vertical Slender Beams Abstract   PDF
Sudhindra N. Jalwadi
 
Vol 2, No 1 (2010) Effect of Velocity and Road Conditions on the Roll Over Behaviour of Sports Utility Vehicles Abstract
Pinaki Mondal, U. D. Bhangale, Dinesh Tyagi, Ravi Kumar Goel, R. Varun Raj, Karan Bhatia
 
Vol 5, No 2 (2013) Effects of Axle box Lateral Clearance and Friction Coefficient on Dynamic Stability and Wear of 3-Piece Bogies Abstract   PDF
M.A. Rezvani, Amin Mazraeh
 
Vol 2, No 2 (2010) Effects of Hand-Arm and Whole-Body Vibrations on Heart of Motorcycle Rider Abstract
B.S. Shivakumara, V. Sridhar
 
Vol 2, No 2 (2010) Effects of Lining Thickness on Squeal in Drum Brake Assembly: Experimental Investigations Abstract
Muhammad Haidir Hussin, Abd. Rahim Abu Bakar, Mohd Rahimi Jamaluddin, Romain Szlapka
 
Vol 9, No 1 (2017) Electric Vehicle by using Modified Topology of Multilevel Inverter Abstract
A. Rathinam, T. Karthikeyan, K. Ramani
 
Vol 9, No 2 (2017) Emission Control in Multi-Cylinder Spark Ignition Engines using Metal-Oxide Coated Catalytic Converter Abstract
K. Parthiban, K. Pazhanivel, S. Jenoris Muthiya
 
Vol 3, No 2 (2011) Energy Absorption Performance of Meso-Scale Discontinuous Carbon Fibre Composites Abstract
Thomas Turner, Lee Harper, Nicholas Warrior, Ari Caliskan
 
Vol 4, No 2 (2012) Energy and Cost Analysis of Weight Reduction using Composite Brake Rotor Abstract
M.A. Maleque, A.A. Adebisi, Q.H. Shah
 
Vol 1, No 4 (2009) Estimation of Applied Forces on Railway Vehicle Wheelsets from Measured Vehicle Responses Abstract
Majid Mehrpouya, Hamid Ahmadian
 
Vol 9, No 2 (2017) Evaluation of Human Exposure to Vibration Subjected to Active Suspension Actuators Abstract
R. Rajalakshmi, S. Rajesh Kumar, J. Thiyagarajan, A. Vinothkumar
 
Vol 8, No 1 (2016) Evaluation of Passenger Ride Comfort of Indian Rail and Road Vehicles with ISO 2631-1 Standards Part 1 - Mathematical Modelling Abstract
R.C. Sharma
 
Vol 8, No 1 (2016) Evaluation of Passenger Ride Comfort of Indian Rail and Road Vehicles with ISO 2631-1 Standards Part 2 - Simulation Abstract
R.C. Sharma
 
Vol 1, No 4 (2009) Evaluation of Railway Vehicle Car Body Fatigue Life and Durability using a Multi-disciplinary Analysis Method Abstract
Bingrong Miao, Weihua Zhang, Jihui Zhang, Dingchang Jin
 
Vol 6, No 3 (2014) Experimental Evaluation of an Empirical Model for Wedge Disc Brake using Box-Behnken Design Abstract   PDF
N.M. Ghazaly, M.M. Makrahy, K.A.A.E. Gwwad, K.R. Mahmoud, A.M.A.E. Tawwab
 
Vol 4, No 2 (2012) Experimental Investigation of Failure Mechanisms in GFRP Lap Joint using Acoustic Emission Abstract
R. Asokan, M. Dinesh, R. Santosh, V. Arumugam, Joseph A. Stanley
 
Vol 1, No 4 (2009) Experimental Investigation of Flange and Web Crippling of Blade Stiffened Composite Panels Abstract
Amauri Gavazzi, Francisco K. Arakaki
 
Vol 7, No 4 (2015) Experimental Investigation of Sisal, Coir and Sugarcane Fibre Reinforced Polymer Matrix Composites Abstract
P. Gurusamy, Leo C. Bestall, J. Arun Pandian
 
Vol 6, No 1-2 (2014) Experimental Investigation of Static Friction Coefficient between Vehicle Tyre and Various Road Conditions Abstract   PDF
M.F. Ezzat, M.A. Mourad, M.M. Yousef
 
Vol 7, No 1 (2015) Experimental Investigation of Vacuum Brake System Performance in Light Commercial Vehicles Abstract
R. Anbalagan, J. Jancirani
 
Vol 7, No 2 (2015) Experimental Investigation of Water Spray and Inclination Angle Influence on Wedge Disc Braking Force Abstract
Mostafa M. Makrahy, K.R.M. Mahmoud, Nouby M. Ghazaly, K.A. Abd El-Gwwad, Ali M. Abd El-Tawwab
 
Vol 4, No 1 (2012) Fatigue Crack Growth Arrestor for High Speed Flexible Coupling of Fighter Aircraft Transmission Systems Abstract
S. Nagesh, A.M. Junaid Bashaa, S. Abilash
 
Vol 3, No 2 (2011) Fine-tuning Nonlinear Finite Element Analysis Methodology for Aircraft Seat Certification using Component Level Testing and Validation Abstract
Prasannakumar S. Bhonge, Hamid M. Lankarani
 
Vol 8, No 4 (2016) Finite Element Analysis and Experimental Investigation of Multi Layer Coating (Al2O3-TiO2 and Cr2C3) on Aluminium Piston by Plasma Spray Technique Abstract
K. Rahul, P. Vijayabalan
 
Vol 5, No 2 (2013) Finite Element Methodology for Flexible Track Models in Railway Dynamics Applications Abstract   PDF
J. Pombo, T. Almeida, H. Magalhães, P. Antunes, J. Ambrósio
 
Vol 3, No 1 (2011) Finite Element Model of a Fuzzy Damper for the Beam-on-Disc Setup Abstract
Oliviero Giannini
 
Vol 5, No 3-4 (2013) Finite Element Simulation for Improved Design of Plastic Intake Manifold for Four Cylinder Engines Abstract   PDF
Zhang Xinjie
 
Vol 3, No 3 (2011) Finite Element Simulation of Axial Crush of Thin-Walled Tubes with Different Cross-Sections: Vehicle/Pole Impact Applications Abstract
Ahmed Elmarakbi, Niki Fielding, Homayoun Hadavinia
 
Vol 6, No 4 (2014) Finite Element Simulation of Ballistic Performance of Dissimilar Metallic Plates Welded Joints Abstract   PDF
S. Sureshkumar, K. Sushinder, S. Sudersan
 
Vol 7, No 4 (2015) Finite Element Simulation of Knuckle and Strut Arm Column Assembly for Automotive Steering System Abstract
N. Gnanasekar, Rama Thirumurugan, S. Madhusuthanan
 
Vol 1, No 4 (2009) Free Vibration Analysis of Sandwich Beams: A Dynamic Finite Element Abstract
Seyed M. Hashemi, Ernest J. Adique
 
Vol 7, No 4 (2015) Friction Stir Processing and Mechanical Testing of SiC-Al2O3 and B4C-Al2O3 Particulates Reinforced Aluminium Alloy Composites Abstract
P. Gurusamy, J. Arun Pandian, Leo C. Bestall
 
Vol 7, No 4 (2015) Fuzzy Analytical Hierarchy Process Based Optimization of Rear View Mirror Design Parameters for Blind Spots Reduction in Heavy Transport Vehicles Abstract
P. Pitchipoo, D.S. Vincent, N. Rajini, S. Rajakarunakaran
 
Vol 7, No 2 (2015) Genetic Algorithm Based Optimization of Box-Cross Section Modulus for Heavy Vehicle Chassis Abstract
K. Rajasekar, R. Saravanan, S. Sowmyashree
 
Vol 7, No 1 (2015) Golden Section Search Based Optimization of Road Vehicle Suspension System Abstract
Prasad Bali, C.V. Chandrashekara
 
Vol 8, No 2 (2016) Gradient Load Evaluation of Chassis Frame Mounted Specialised Structure Designed for Heavy Off-Road Vehicles Abstract
V.R. Deulgaonkar
 
Vol 8, No 1 (2016) H∞ Control of Active Suspension System for a Quarter Car Model Abstract
N.M. Ghazaly, A.S Ahmed, A.S Ali, G.T Abd El- Jaber
 
Vol 2, No 2 (2010) Heavy Truck Occupant Safety Analysis using Finite Element Simulation Abstract
R. Asad Ahmed, Abani K. Patra
 
Vol 8, No 4 (2016) Impact of Oxidation Inhibitors on Performance and Emission Characteristics of a Low Heat Rejection Engine Abstract
P.S. Kumar, S.A. Kannan, A. Kumar, K.A.V. Geethan
 
Vol 8, No 3 (2016) Impression Creep Behaviour of Extruded Mg-Sn Alloy Abstract
V. Thenambika, S. Jayalakshmi, R.A. Singh, J.K. Nidhi, M. Gupta
 
Vol 4, No 2 (2012) Improved Air Intake System Louvers for Armour Fighting Vehicles Abstract
S. Krishnakumar, N. Singaravelu, C. Kumaravelu, S. Suresh
 
Vol 4, No 1 (2012) Improved Cable type Accelerator Control System with Slider Mechanism for Commercial Vehicles Abstract
Sanjoy Biswas, Abhisek Bardhan, Ajay Pandey, Sanjay Sharma
 
Vol 9, No 1 (2017) Improvement of Horse Power and Specific Fuel Consumption in Diesel Engine: Technical Note Abstract
R. Sudhakar, V.V. Kumar, R. Venkatesh, B. Suresh
 
Vol 9, No 2 (2017) Improvements in Vehicle Stiffness by Adding Internal Reinforcements Abstract
R. Mohan, V. Hariram, M. Subramanian, S. Padmanabhan
 
Vol 3, No 3 (2011) Influence of a Truck Side Under-ride Guard Height on Cabin Intrusion and Occupant Injury Potential of a Small Car in Car/Large-Truck Side Crashes Abstract
Rasoul Moradi, Rajarshi Setpally, Hamid M. Lankarani
 
Vol 2, No 2 (2010) Influence of Air Conditioning Characteristics on Vehicle Interior Noise Abstract
Nabil Hammad
 
Vol 8, No 2 (2016) Influence of Flexible Bodies in Military Tracked Vehicle Dynamics Abstract
S. Jothi, V. Balamurugan, K.M. Mohan
 
Vol 9, No 1 (2017) Influence of Fuel Consumption and Instantaneous Exhaust Pollutants on Euro 4 Gasoline Vehicles at Traffic Signalized Intersections: Idling and Start/Restart Manoeuvre Abstract
Manpreet Singh, A. Sharma, S. Sharma
 
Vol 7, No 2 (2015) Influence of Road Roughness Parameters on Low Frequency Interior Noise in Off-road and Mid-size Passenger Vehicles Abstract
Shawki A. Abouel-Seoud
 
Vol 6, No 3 (2014) Influence of Water, Oil and Dust on the Performance of Conventional and Wedge Disc Brakes Abstract   PDF
K.R.M. Mahmoud, M.A. Mourad
 
Vol 4, No 3 (2012) Innovative Material Systems for Composite Vehicle Structures Abstract
Prasad Potluri, Dhaval Jetavat, Paul Hogg
 
Vol 7, No 1 (2015) Instantaneous Exhaust Emissions and Fuel Consumption in Gasoline Vehicles Testing and Empirical Analysis Abstract
Manpreet Singh, Ankit Sharma, Vivek Jain
 
Vol 2, No 3-4 (2010) Integrated Control and Regulated DC Supply with High Power Quality for Automotive Applications Abstract
Nabil Hammad
 
Vol 3, No 2 (2011) Integration of a Composite Crash Absorber in Aircraft Fuselage Vertical Struts Abstract
Sebastian Heimbs, Florian Strobl, Peter Middendorf
 
Vol 8, No 2 (2016) Inter-laminar Strength of Bonded Composite Lap Joints with Selective Stitching Through the Thickness Abstract
R.H. Hemanth , G.V.V. Ravi Kumar
 
Vol 6, No 4 (2014) Investigation of Hybrid Composite Drive Shaft under Tensile, Bending and Torsion Testing Abstract   PDF
C. Sivakandhan, P. Suresh Prabhu
 
Vol 6, No 3 (2014) Investigation of Vehicle Parameters in Regenerative Coil Suspension Design Abstract   PDF
T.A. Selvan, S. Navin, K.R. Ram Ganesh
 
Vol 9, No 2 (2017) Investigation on the Dynamic Mechanical Properties of Self-Healing Glass Fibre Reinforced Plastics Abstract
J. Lilly Mercy, S. Prakash
 
Vol 6, No 4 (2014) Investigations on Dissimilar Welded Joints by Magnetic Pulse Method Abstract   PDF
S. Muthukumaran, S. Kudiyarasan, S. Arungalai Vendan, A. Senthil Kumar
 
Vol 7, No 4 (2015) Laboratory Scale Testing of Thermoelectric Regenerative Braking System Abstract
P. Sevvel, I.S. Stephan Thangaiah, S. Mars Mukesh, G. Mohammed Anif
 
Vol 3, No 2 (2011) Lightweight Hybrid Electrical Vehicle Structural Topology Optimisation Investigation Focusing on Crashworthiness Abstract
Jesper Christensen, Christophe Bastien, Mike Blundell, Andrew Gittens, Oliver Tomlin
 
Vol 2, No 2 (2010) Load Transfer in Truck Cab Structures under Initial Phase of Frontal Collision Abstract
Enyang Wang, Yuki Yoshikuni, Qiushi Guo, Tetsuo Nohara, Hideaki Ishii, Hiroaki Hoshino, Kunihiro Takahashi
 
Vol 8, No 3 (2016) Maintenance Cost Optimization of Faulty Gearbox under Continuous Vibration Measurement Monitoring Abstract
S.A. Abouel-Seoud
 
Vol 9, No 2 (2017) Material Optimization of Rail Track Welding and Validation using Finite Element Simulation Abstract
R. Manivel, R. Shanmuga Prakash
 
Vol 3, No 4 (2011) Modal Analysis of Transverse Vibrations of a Thin Rectangular Plate with a Bonded Piezoelectric Patch Abstract
Amit Tyagi, M.K. Ghosh
 
Vol 2, No 3-4 (2010) Modeling Abstractions of Vehicle Suspension Systems Supporting the Rigid Body Analysis Abstract
Yucheng Liu
 
Vol 9, No 2 (2017) Modeling and Simulation of Off-Road Vehicle Mobility with Driving Torque Distribution Control on Split Adhesion Conditions Abstract
M.M. Abd El-Hafiz, M.A.A Emam, W.A.H Oraby, S. Shaaban
 
Vol 8, No 1 (2016) Modelling and Simulation of a Lead Acid Battery for Traction Applications Abstract
D. Elangovan, G. Arunkumar, H.M. Tania, J.K Patra
 
Vol 8, No 1 (2016) Modelling and Simulation of Current Fed Interleaved Isolated DC-DC Boost Converter for Fuel Cell Applications Abstract
S. Saha, A. Bhattacharjee, E. Devaraj
 
Vol 3, No 2 (2011) Modelling of Low Velocity Impact of Laminated Composite Substructures Abstract
Homayoun Hadavinia, F. Dogan, Ahmed Elmarakbi, S.M.R. Khalili
 
Vol 7, No 1 (2015) Multibody Modelling of Engine and Minimization of Engine Mount Vibration using Ant Colony Algorithm Optimization Abstract
T. Ramachandran, K.P. Padmanaban
 
Vol 8, No 1 (2016) Multi-Objective Optimization of Material Layout for Body-In-White using Design of Experiments Abstract
M. Rajasekaran, V. Hari Ram, M. Subramanian
 
Vol 8, No 3 (2016) Multiple Defects Detection in Outer Race of Gearbox Ball Bearing Using Time Domain Statistical Parameters Abstract
A. Nabhan, A.M. Sami, M.O. Mousa, M. Nouby
 
Vol 3, No 2 (2011) Multi-Scale Ballistic Impact Simulation of Dry Woven Fabric with Elastic Crimped Fibers Abstract
Ala Tabiei, Gaurav Nilakantan
 
Vol 6, No 4 (2014) Musculoskeletal Discomfort Analysis in Forklift Operations Abstract   PDF
Kuruva Gopanna, K. Sankaranarayanasamy, A.K. Ganguli, K. Muthukumar
 
Vol 2, No 1 (2010) Neural Networks Based Fatigue Life Prediction of Multi Walled Carbon Nano Tubes Doped E-Glass/Epoxy Laminates Abstract
J. V. Sai Prasanna Kumar, M. Soroja Devi, G. Raghava, A. Joseph Stanley
 
Vol 9, No 2 (2017) Numerical Analysis and Testing of Tungsten Inert Gas Welded T-Joints Abstract
A. Arun Kumar, S. Ravichandran, M. Kumaresan, P. Sathish
 
Vol 5, No 2 (2013) Numerical Analysis of Aerodynamic Performance of Regional Passenger Train under Crosswind Conditions Abstract   PDF
Masoud Mohebbi, M.A. Rezvani
 
Vol 8, No 4 (2016) Numerical Analysis of Hydrodynamic Journal Bearing Lubrication using Computational Fluid Dynamics and Fluid Structure Interaction Approach Abstract
D.Y. Dhande, D.W. Pande
 
Vol 8, No 4 (2016) Numerical Analysis of Novel Design for Ventilated Brake Disc Abstract
A. Krishnan, S.K. Sampat, H. Vinod, M.S. Kumar, P.K.A. Babu
 
Vol 4, No 4 (2012) Numerical and Experimental Dynamic Analyses via Smart Composites Abstract
Ricardo de Medeiros, Marcelo L. Ribeiro, Gregorio F. O. Ferreira, Flavio D. Marques, Volnei Tita
 
Vol 8, No 3 (2016) Numerical Investigation of Drag and Lift Forces on a Sedan Car using Computational Fluid Dynamics Abstract
M.F. Mohamed, P.L. Madhavan, E. Manoj, K. Sivakumar
 
Vol 5, No 2 (2013) Optimisation of Anti-Resonance Vehicle Configuration for Vibration Attenuation of Railway Bridges Abstract   PDF
Farzad Vesali, Mina Kolagar, M.A. Rezvani
 
Vol 7, No 2 (2015) Optimisation of Spindle Speed and Feed Rate for Drilling of Al-SiCp Metal Matrix Composites using ANOVA and Genetic Algorithm Abstract
S. Muthukumar, P. Mathiyalagan
 
Vol 4, No 4 (2012) Parametric Analysis of Puck-Matzenmiller Theory based Damage Model for Composite Structures Abstract
Marcus V. Angelo, Ana-Cristina Galucio, Volnei Tita
 
Vol 1, No 4 (2009) Parametric Study of Suspension Elements for Ride Index Analysis of an Indian Railway Freight Vehicle Abstract
Sanjay Shukla, Rajive Gupta, Nalinaksh S. Vyas
 
Vol 8, No 1 (2016) Parametric Study on Proportional Integral Derivative Controlled Semi-Active Suspension System Abstract
E.M Allam, M.A.A Emam, Eid.S Mohamed
 
Vol 2, No 3-4 (2010) Parametric Study on Transverse Vibration of Thin Rectangular Plate with Bonded Elastic Patch Abstract
Amit Tyagi, M. K. Ghosh
 
Vol 8, No 4 (2016) Passenger Comfort Analysis in an Automotive Considering a Magneto-Rheological Damper based Suspension Abstract
R.B. Soujanya, D.D. Jebaseelan, S. Kannan
 
Vol 8, No 3 (2016) Performance Analysis of Diesel Particulate Filter using Glass Fibers Abstract
K.R. Sandhya, D. Rekha, P. Shanmughasundaram
 
Vol 7, No 4 (2015) Performance and Emission Analysis of Bioethanol Diethyl Ether Fuelled Compression Ignition Diesel Engines Abstract
Sugavanam Janakiraman, Thangavelu Lakshmanan
 
Vol 8, No 3 (2016) Performance and Emission Evaluation of CNG as an Alternative Fuel in a Bi-fuel SI Engine Powered Vehicle Abstract
S.A. Abouel-Seoud
 
Vol 8, No 3 (2016) Performance Enhancement of Three-way Catalytic Converter using External Heating Source: An Experimental Approach Abstract
S. Kanchan, Manpreet Singh, Mandeep Singh
 
Vol 7, No 4 (2015) Performance Evaluation of Compression Ignition Direct Injection Diesel Engine on Dual Fuel Mode with Mango Oil Methyl Ester Biofuel Abstract
A. Kumaraswamy, B. Durga Prasad
 
Vol 8, No 2 (2016) Performance of Compression Ignition Engine with Coated Piston for Multiple Blends of Methyl Castor Oil Abstract
V.H. Wilson, V. Yalini
 
Vol 4, No 2 (2012) Performance of Electromagnetic based Suspension System for Automobiles Abstract
K. Prabu, J. Jancirani
 
Vol 4, No 4 (2012) Prediction of Failures in Single Lap Bonded Composite Joint Subjected to Low Energy Impact Loading Abstract
Sergio A. Capasciutti de Oliveira, Mauricio V. Donadon, Jose R. Tarpani
 
Vol 5, No 2 (2013) Prediction of Residual Stress Distribution in Flash Butt Welded Rails using Electro-Thermo-Mechanical Simulation Abstract   PDF
Seiied P. Haibatollahi, Parisa H. Tehrani
 
Vol 4, No 1 (2012) Preventing Disc Brake Squeal using a Thin Plate Shim Abstract
Abd Rahim Abu Bakar, Muhammad Amir Zainudin
 
Vol 9, No 2 (2017) Processing of K-Nearest Neighbour Queries in Road Networks using Spatial Air Index Abstract
M. Veeresha, M. Sugumaran
 
Vol 8, No 4 (2016) Production and Analytical Comparison of Atomization Characteristics for Ternary Blends of Biodiesel Abstract
K. Sudalaiyandi, K.S. Amirthagadeswaran, P. Selvan
 
Vol 7, No 4 (2015) Proof of Concept Fabrication of Multi-axis Pneumatic Mechanism for Dumpers Abstract
P. Sevvel, V. Nirmal Kannan, S. Parameshwaran, Mohan Kumar
 
Vol 4, No 3 (2012) Propagation of the Fundamental Symmetric Lamb Mode in a Symmetrically Delaminated Composite Laminate Abstract
C. Ramadas, Janardhan Padiyar, Krishnan Balasubramaniam, Makarand Joshi
 
Vol 4, No 1 (2012) Proportional Integral Derivative Control of Hydro-Gas Suspension Unit for Tracked Vehicles Abstract
G. Srinivasan, A.M. Junaid Bashaa, M. Senthil Kumar, K. Anbudurai
 
Vol 1, No 1-3 (2009) Proposal of a Methodology for Multidisciplinary Design of Multifunctional Vehicle Structures including an Acoustic Sensitivity Study Abstract
Christopher J. Cameron, Eleonora Lind, Per Wennhage,
 
Vol 6, No 4 (2014) Prototype Aircraft Sub-Assembly Fabrication using Common Stage Walking Line Assembly Model Abstract   PDF
L. Gopinath, S. Ravishankar
 
Vol 5, No 1 (2013) Rack and Pinion Steering System Control using Electronic Side-stick Abstract   PDF
Saeed A.A. Albatlan
 
Vol 5, No 1 (2013) Real-Time Automated SHM for Systems in Interplanetary Subsurface Exploration Abstract   PDF
S. Statham, S. Hanagud, B.J. Glass
 
Vol 4, No 2 (2012) Recent Advances in Railway Vehicle Dynamics Abstract
Rakesh Chandmal Sharma
 
Vol 9, No 2 (2017) Reduction of Body Acceleration in the Quarter Car Model using Fractional Order Fuzzy Sliding Mode Controller Abstract
S. Rajendiran, P. Lakshmi, B. Rajkumar
 
Vol 4, No 4 (2012) Representative Volume Element based Transverse Shear Characterisation of Laminated Composites Abstract
Murilo Sartorato, Ricardo de Medeiros, Marcelo L. Ribeiro, Volnei Tita
 
Vol 5, No 3-4 (2013) Response Surface Method based Railway Wheel Optimisation for Natural Frequency Abstract   PDF
Nagvendra Kumar Kanoje, Satish C. Sharma, Suraj P. Harsha
 
Vol 3, No 4 (2011) Ride Analysis of an Indian Railway Coach using Lagrangian Dynamics Abstract
Rakesh Chandmal Sharma
 
Vol 6, No 4 (2014) Ride Comfort Analysis of Unsuspended Cabin Tractor Semi-Trailer Abstract   PDF
P. Velmurugan, K. Sankaranarayanasamy, L.A. Kumaraswamidhas, K. Pazhanivel
 
Vol 3, No 2 (2011) Security of Bolted Joints during Explosive Loading Abstract
Ian Horsfall, Bjarne Hansen, Debra Carr
 
Vol 5, No 3-4 (2013) Sensitivity Analysis of Ride Behaviour of Indian Railway Rajdhani Coach using Lagrangian Dynamics Abstract   PDF
Rakesh Chandmal Sharma
 
Vol 4, No 4 (2012) Sensitivity of Automated Fibre Placement Parameters on Manufacturing Defects in Laminated Composites Abstract
Alex C. Bottene, Wellington L. Nunes de Mello, Rynaldo Z. Hemerly de Almeida
 
Vol 3, No 1 (2011) Sensitivity of Sub-critical Mode-coupling Instabilities in Non-conservative Rotating Continua to Stiffness and Damping Modifications Abstract
Oleg N. Kirillov
 
Vol 5, No 2 (2013) Sensitivity of Train Velocity and Track Curvature on Wear in Closed Loop Wheel-Rail Profiles Abstract   PDF
Habibollah Molatefi, Morad Shadfar
 
Vol 8, No 3 (2016) Simulation and Experimental Research on Vehicle Ride Comfort and Suspension Parameters Optimisation Abstract
Z. Ding , Z. Lei
 
Vol 8, No 1 (2016) Simulation and Experimentation of Fourth Order DC-DC Boost Converter for Renewable Energy Source Applications Abstract
S.B Mohanty, K.M Ravi Eswar, D. Elangovan, G. Arun Kumar
 
Vol 9, No 1 (2017) Simulation and Numerical Analysis of Crashworthiness Behaviour of Thin Walled Structure Abstract
D. Yesuraj, M.S.P.P. Vallavaraayan, S. Selvaraj
 
Vol 8, No 3 (2016) Simulation based Sensitivity Study of Tread Pattern and Materials on Cooling Efficiency of M1 Vehicle Tyres Abstract
N. Nithyavathy, R. Parameshwaran, K. Suganeswaran, C. Naveen, G. Raja
 
Vol 8, No 3 (2016) Simulation of Automotive Anti-Collision System using Matlab Abstract
J. Gong
 
Vol 7, No 3 (2015) Simulation of Electrical Actuator and Air Spring Actuator Controlled Suspension Systems for Automotive Vehicles Abstract
P. Sathishkumar, J. Jancirani, D. John, B. Arun
 
Vol 4, No 1 (2012) Single Interrupt Control and Regenerative Braking of PMBLDC Motor for Electric Vehicles Abstract
Varsha A. Shah, Divyesh Mistry, Prasanta Kundu, Ranjan Maheshwari
 
Vol 3, No 1 (2011) Special Issue on Brake Noise, Vibration and Harshness - Editorial Forward Abstract
Abd Rahim Abu Bakar
 
Vol 4, No 3 (2012) Special Issue on Composites and SHM - Editorial Forward Abstract
B. Dattaguru, S. Gopalakrishnan
 
Vol 4, No 4 (2012) Special Issue on First Brazilian Conference on Composite Materials Editorial Forward Abstract
Carlos A. Cimini Jr., Jose D.D. Melo, Gerson Marinucci, Flaminio L. Neto, Francisco K. Arakaki
 
Vol 3, No 2 (2011) Special Issue on Structural Impact and Crashworthiness: Part I - Preface Abstract
Homayoun Hadavinia, Ahmed Elmarakbi
 
Vol 3, No 3 (2011) Special Issue on Structural Impact and Crashworthiness: Part II - Preface Abstract
Homayoun Hadavinia, Ahmed Elmarakbi
 
Vol 1, No 4 (2009) Spectral Optimization of High-Speed Train Suspension Systems Abstract
Davood Younesian, Amir Nankali
 
Vol 3, No 1 (2011) Stability Analysis for a Self-exciting Mechanism with Friction Using Interval Computations Abstract
Sebastien Berger, Jean Jacques Sinou
 
Vol 5, No 1 (2013) Stability and Eigenvalue Analysis of an Indian Railway General Sleeper Coach using Lagrangian Dynamics Abstract   PDF
Rakesh C. Sharma
 
Vol 1, No 4 (2009) Strength of Super-Structure UN-ECE R66 Rollover Approval of Coaches based on Thin-Walled Framework Structures Abstract
S.M. R. Hashemi, A. C. Walton, K. Kayvantash
 
Vol 4, No 3 (2012) Structural Health Monitoring of Composite Structures - Issues and Challenges Abstract
Ramesh Sundaram, G.M. Kamath, Nitesh Gupta
 
Vol 4, No 3 (2012) Study on Finite Element Modeling Aspects of Delaminated Honeycomb Sandwich Beams Abstract
K.R. Pradeep, S.M. Srinivasan, B. Nageswara Rao, K. Balasubramaniam
 
Vol 2, No 3-4 (2010) Synthesis of Equivalent Load Conditions for Military Vehicles Abstract
Claudio Braccesi, Filippo Cianetti, Luca Silvioni
 
Vol 8, No 1 (2016) Systematic Layout Planning and Balancing of Engine Production Processes for After Test and After Paint Assembly Lines Abstract
R. Durga Prasad, K. Vishwa Kumar , P.A Jeeva
 
Vol 8, No 2 (2016) Technical Note on Secure Service Access in VANET using PBKDF Algorithm Abstract
P. Dharanyadevi, T. Divyasree, S.P. Sharmila, K. Venkatalakshmi
 
Vol 1, No 4 (2009) The Effect of Profiles on Wheel and Rail Damage Abstract
Simon D. Iwnicki
 
Vol 3, No 1 (2011) The Influence of Pad Abutment on the Generation of Brake Noise Abstract
John D. Fieldhouse, David Bryant, Chris J. Talbot
 
Vol 5, No 3-4 (2013) Theoretical and Experimental Investigation of Magneto-Rheological Damper based Semi-Active Suspension Systems Abstract   PDF
Alisina Shojaei, H. Metered, Siamak Shojaei, S. Olutunde Oyadiji
 
Vol 2, No 1 (2010) Thermal Analysis of a Disc Brake Model Considering a Real Brake Pad Surface and Wear Abstract
Abd. Rahim Abu Bakar, Huajiang Ouyang, Lee Chiing Khai, Mohd Shahrulizam Abdullah
 
Vol 4, No 4 (2012) Thermal Expansion Behaviour of Magnesium Boron Fibrous Composites Abstract
Alexandre R. Soares, Bojan A. Marinkovic, Luciana P. Prisco,
 
Vol 5, No 1 (2013) Thermo-mechanical Stress Analysis of Disc Brake Rotor Abstract   PDF
Ali Belhocine, Mostefa Bouchetara
 
Vol 3, No 4 (2011) Thermo-structural Analysis of 3D Composites for Reusable Vehicle Applications Abstract
B. Santhosh, C.G. Nandakumar, S. Sundararajan
 
Vol 3, No 4 (2011) Use of General Finite Elements for Smart Structures: Technical Note Abstract
K. Badari Narayana
 
Vol 9, No 1 (2017) Using Real-Time Data for Increasing the Efficiency of the Automated Fibre Placement Process Abstract
D. Winter, D. Crowley, C. Ward, S. Williams, C. McMahon, K. Potter
 
Vol 3, No 4 (2011) Validation of Rear Axle with Differential Lock for Off-Road Vehicles Abstract
Sanjoy Biswas, Saswata Ranjan Das, Goutam Mandal, Sanjay Sharma
 
Vol 7, No 2 (2015) Vertical Vibration Analysis of the Flexible Carbody of High Speed Train Abstract
Cao Hui, Zhang Weihua, Miao Bingrong
 
Vol 1, No 1-3 (2009) Vibration Analysis of Composite Folded-Plate Members Abstract
Nuno Silvestre, Dinar Camotim
 
Vol 1, No 1-3 (2009) Vibration Analysis of Cracked Stepped Laminated Composite Beams Abstract
Stephen R. Borneman, Seyed M. Hashemi, Hekmat Alighanbari
 
Vol 8, No 4 (2016) Vibration based Fault Diagnosis of Automobile Hydraulic Brake System using Fuzzy Logic with Best First Tree Rules Abstract
M.N. Gajre, R. Jegadeeshwaran, V. Sugumaran, A. Talbar
 
Vol 5, No 1 (2013) Vibration Based Prediction of Noise in Passenger Car Gearbox Structures Abstract   PDF
Shawki S. Abouel-seoud, Eid S. Mohamed, Ahmed A. Abouel-yazid, Ahmed S. Abdalkkah
 
Vol 7, No 4 (2015) Vibration Characteristics of Journal Bearing with Various Damping Materials Abstract
T. Narendiranath Babu, D. Rama Prabha
 
Vol 2, No 1 (2010) Vibration Isolation of a GA Optimized Biomechanical Model of a Railway Passenger Using Magneto Rheological Damper Seat Suspension Abstract
Javad Marzbanrad, Yousef Amiri Rad, Amir Afkar
 
Vol 8, No 1 (2016) Vibration Measurement and Spectral Analysis of Chassis Frame Mounted Structure for Off-Road Wheeled Heavy Vehicles Abstract
V.R. Deulgaonkar
 
Vol 2, No 3-4 (2010) Weight Reduction in an Indian Railway CASNUB Bogie Bolster Considering Fatigue Strength Abstract
Sanjay Shukla, Rajive Gupta, Nalinaksh S. Vyas
 
Vol 7, No 4 (2015) Wet Sliding Wear Optimization of Gray Cast Iron using Taguchi Technique Abstract
S. Ananth, J. Udaya Prakash, T.V. Moorthy, P. Hariharan, R. Magendran, A.R. Sivanesh
 
Vol 9, No 1 (2017) Wireless Charging System for Electric Vehicles Abstract
K. Paramesh, R.P. Neriya, M.V. Kumar
 
1 - 245 of 245 Items